- Display 30 Products per page
Filters Sort results
Reset Apply
TP SCREWS/SURF Tamperproof Screws for Surface Mounted Units: 1BX, 2BX, 3BX, 2BXL, 3BXL, PBT-3, PBTL-3, 3BLM, 1KX, 1KXS, 1KXL and 1KXL-O | ||
CMM-2 Extended Length=20 Feet, 2 Wire, 18 Gauge, Cord Type SVT, Metal Enclosure that is White in Color, Provided Without Stops, Supplied with Mounting Bracket | ||
TS-LED Two Position - RED/GREEN LED Traffic Signal, 8"" Lights in Polycarbonate Enclosure, 115VAC ONLY, Supplied with Visors, H=20', W=11-1/2"", D=6""; **NOTE: Optional Mounting Hardware Available - See P/N TSM-1 (does not come as standard) | ||
PBS-3UDS Momentary Contact, Up-Down-Stop H=5-5/16" X W=2-3/8" X D=1-13/16" with Metal Housing | ||
HERCULES Motion Detector, Mounting Height 6-1/2' to 23', Includes 23' of Cable, Voltage: 12-28VDC, 12-26VAC, Technology: Doppler Radar with Planar Module, Exterior; **NOTE: Optional Programming Remote Available - See P/N REMOTE-H | ||
HBFX-CC OPEN-CLOSE with Center Return Key Switch, Changeable Cylinder, Stainless Steel Faceplate, Faceplate: H= 4-1/2"" W=2-3/4", Back Box: H=4", W=2", D=2" | ||
3B4XL OPEN-CLOSE-STOP Push Button with Lockout, Rosite Enclosure, Buttons aligned in a triangular pattern, H=4-1/4"", W=4-1/4"", D=2-1/2"" | ||
3BLM OPEN-CLOSE-STOP Push Button with Mortise Lockout, Metal Enclosure, Buttons aligned vertically, H=7"", W=2-3/4"", D=3-1/2"" | ||
DR4 Delta 3 Four Channel Receiver, 310 MHz, 8 Dipswitch, Voltage: 24VAC/DC, Wire Antenna (NOT ""F"" Connector), Model: DNR00023A | ||
MG020-2E-5 Electric Gate Edge with Three-Sided Activation, Includes Channel, 5 Foot, Black in Color, Non-Monitored | ||
PBC-2 Single Gang Box, Stainless Steel Faceplate, Momentary Contact, OPEN-CLOSE, H=4-1/4"" W=2-3/4"" Back Box H=4"" W=2"" | ||
9931R Pulsar One Channel Receiver, 318 MHz, 9 Dipswitch, Voltage 24VAC/DC, 3 Prong Connection | ||
MDKP Megacode Exterior Commercial Keypad, 318 MHz, 12 Metal Buttons (0-9, ""*"" & ""#""), PIN can be 1 to 6 Numbers, Works best with AP-5 or SMDRG, Lighted, Size: 7"" x 3-7/8"", Model: ACP00878 | ||
893LM LiftMaster Three Button Transmitter, Security+ 2.0, Compatible with Operators Manufactured 2008 or Newer and MyQ, Frequencies: 310 MHz, 315 MHz & 390 MHz | ||
WD-297138 Wireless Keypad for 303 MHz, 12 Buttons (Numbers 0-9, ""*"" & ""#""), 4 Digit PIN, Two LED Lights (Green & Yellow), Color: Black, Size 6-1/8"" x 2-1/2"", Works with Wayne-Dalton Models: Classic Drive: 3012, 3016, 3512; Quantum: 3212, 3213, 3313, 3412 | ||
1KFSX-BC OPEN-CLOSE with Center Return Key Switch with Stop Button, Best Cylinder or Equivalent, Flush Mount, Tamperproof, Faceplate: H=6"", W=4-3/4"", D=2-7/8"", Back Box: 3-3/4"", W=3-3/4"" | ||
41AC075-2S Receiver Board for AC Chain Drive, Purple Button (315 MHz), Light, 3/4 HP, Single Capacitor (see P/N 41AC075-2 for Dual Capacitor - OBSOLETE no replacement), Works with Models: 3585 (Belt), 3595, 3575, 3575-267DK, 2585 & 2595 | ||
2EBX Explosion Proof OPEN-CLOSE Push Button, Metal Enclosure, H=6-1/8"", W=3"", D=4-3/8"" | ||
878MAX LiftMaster Wireless Keypad, Security+ and Security+ 2.0, 315 MHz and 390 MHz, Color: Tan, 4 Digit PIN, 13 Button (0-9, "8", "#" & Enter) with Flip Cover, Temporary Password Option, Compatible with Operators Manufactured since January 1993 | ||
2BXL OPEN-CLOSE Push Button with Lockout, Metal Enclosure, Buttons aligned vertically, H=4-3/8"" W=4-1/8"" D=2-5/8"" | ||
PRH-100 Flush Mounted Emergency Egress Control, Handle is Flush with Faceplate, comes with 15 Foot of Cable with S-Hook, Faceplate: H=8-1/4"", W=4-1/2"", Back Box: H=7"", W=3-3/4"", D=3-1/2"" | ||
1KX-BC OPEN-CLOSE with Center Return Key Switch, Best Cylinder or Equivalent, Tamperproof, H=4-3/8"", W=4-1/8"", D=2-5/8"" | ||
AUX MAG Auxiliary Magnetic Switch, Low Voltage Only, Comes with 17 Inches of Protected Cord | ||
733T Pulsar Wall Mount Three Button Transmitter with a Dial (Labeled A,B,C) to Operate 3 Doors with Open/Close/Stop Function, 318MHz, Size: 5-3/4"" x 3"" x 2-1/4"" | ||
3BFLX OPEN-CLOSE-STOP Push Button with Lockout, Metal Enclosure, Buttons aligned in a triangular pattern, Faceplate: H=6"", W=4-3/4"", D=2-7/8"", Back Box: H=3-3/4"", W=3-3/4"" | ||
VSA-5 Exterior Electrical Vehicle Treadle Switch, 5 Foot Length, In Protective Housing with Ramped Edges, 24VAC, Yellow/Black in Color | ||
3BXLT OPEN-CLOSE-STOP Push Button with Lockout, Non-Metallic Enclosure, Double Pole Contacts, Buttons aligned vertically, H=7"" W= 2-3/4"" D=2-3/4"" | ||
SKH Motor Driven Rotating Beacon Light with One-Piece Lens and Base; **NOTE: Optional Mounting Bracket - See P/N SZ-007 | ||
41A5585-1 Gear and Sprocket Assembly, Sprocket has 10 Metal Teeth for Chain Drive, also comes with Grease Packet and Hardware | ||
DTG Delta 3 Gate Edge Transmitter, 310 MHz, 8 Dipswitch, Model: DNT00072 | ||
KEY Duplicate Cut Keys: Available Keys: Mortise # 001; 3BXL/PBTL-3 #s Z100, Z101, Z102, Z103 & Z104; 3BXLT #s K001, K002, K003, K004 & K005 | ||
STAR 1000 LiftMaster Receiver, Programs upto 1000 devices (a combination of transmitters and wireless keyless entries), Compatible with Security+ 2.0 Only | ||
TS-TRI-24V Two Position - RED/GREEN LED Traffic Signal, 24VAC/DC, H=11-1/2"", W=6-1/2"", D=4"" | ||
D-PED Dual Height Pedestal at 42 Inch and 72 Inch, Mounting Face: W=4"", L=4"", Slots: W=1/4"", L=3/4"", Base Plate: W=5-11/16"", L=5-11/16"", Black in Color | ||
1KXL-CC ON-OFF Two Position Key Switch, Changeable Cylinder, H=4-3/8", W=4-1/8"", D=2-5/8" | ||
41AB050-2 Receiver Board for AC Belt Drive, Purple Button (315 MHz), Light, End Panel Style, 1/2 HP Operator, Works with Models: 3280, 3280-267, WD822KD & HD600 | ||
1KFS OPEN-CLOSE with Center Return Key Switch with Stop Button, Mortise Cylinder, Flush Mount, Tamperproof, Faceplate: H=6"", W=4-3/4"", D=2-7/8"", Back Box: 3-3/4"", W=3-3/4"" | ||
PBS-3 Momentary Contact, OPEN-CLOSE-STOP H=5-5/16" W=2-3/8" D=1-13/16" with Metal Housing | ||
41AS050-1 Receiver Board for 1/2 HP Screw Drive, Purple Button (315 MHz), No Light, End Style Panel, Works with Models: 3110, 3220, PD420D, PD422D, PD462D, 9950D | ||
3090 Stanley One Channel Receiver, 310 MHz, 10 Dipswitch, Voltage 24VAC, 3 Prong Connection | ||
BD-4X6P Paveover Preformed Loop Supplied with 18 AWG Insulated Wire with 40 Foot of Lead, Size: 4 Foot x 6 Foot |