- Display 15 Products per page
Filters Sort results
Reset Apply
TS-LED Two Position - RED/GREEN LED Traffic Signal, 8"" Lights in Polycarbonate Enclosure, 115VAC ONLY, Supplied with Visors, H=20', W=11-1/2"", D=6""; **NOTE: Optional Mounting Hardware Available - See P/N TSM-1 (does not come as standard) | ||
SKH Motor Driven Rotating Beacon Light with One-Piece Lens and Base; **NOTE: Optional Mounting Bracket - See P/N SZ-007 | ||
882LMW LiftMaster Multi-Function Control Panel, Controls your garage door and opener lights, Adjustable Light Timer Function, Easily programs remote controls and MyQ enabled accessories, Compatible ONLY with Security+ 2.0 garage door openers enabled by MyQ technology. | ||
R1090D Multi-Code Double Set - 1 Receiver (R1090R) and 2 Transmitters (R3089), 300 MHz, 10 Dipswitch | ||
1KFSX OPEN-CLOSE with Center Return Key Switch with Stop Button, Mortise Cylinder, Flush Mount, Tamperproof, Faceplate: H=6"", W=4-3/4"", D=2-7/8"", Back Box: 3-3/4"", W=3-3/4"" | ||
D-2-5 Residential Metal Keyed Disconnect Device Operated from Outside Garage, Comes with 5 Foot of Cable | ||
3BLM-BC OPEN-CLOSE-STOP Push Button with Best Cylinder or Equivalent Lockout, Metal Enclosure, Buttons aligned vertically, H=7, W=2-3/4"", D=3-1/2"" | ||
MDKP Megacode Exterior Commercial Keypad, 318 MHz, 12 Metal Buttons (0-9, ""*"" & ""#""), PIN can be 1 to 6 Numbers, Works best with AP-5 or SMDRG, Lighted, Size: 7"" x 3-7/8"", Model: ACP00878 | ||
ASX-1 Explosion Proof Pneumatic Switch, Metal Enclosure, H=5-3/4"", W=4-1/2"", D=4-1/2"" | ||
GK-BX Genie Wireless Keypad, Intellicode, 315 and 390 MHz, Color: White, Can Operate Upto Three Garage Doors, 11 Buttons (0-9 and Up/Down) with Flip Cover | ||
CP-2X Explosion Proof Ceiling Pull Switch, SPST, Metal Enclosure, H=6-1/8"", W=3"", D=5"" | ||
N/C Switch Normally Closed Switch includes Switch, O-Ring, Bezzle and Red Rubber Cover | ||
1099-50 Multi-Code/Stanley One Channel Receiver, 300 MHz or 310 MHz (with toggle to change MHz), Voltage: 12-24VAC/DC, 10 Dipswitch, ""F"" Connector and comes with 3 Feet of Coax Cable | ||
N/O Switch Normally Open Switch includes Switch, O-Ring, Bezzle and Black Rubber Cover | ||
41C4220A Gear and Sprocket Assembly, Sprocket has 8 Metal Teeth for Chain Drive | ||
MICROSTAR Motion Detector with Field Selectable Unidirectional or Bidirectional Detection, Narrow or Wide Patterns, Variable Elevation, Comes with Mounting Bracket, Voltage: 12-24VAC/DC | ||
RAY-RT NEMA 4X Monitored Reflective Photocell, UL325/2010 Recognized, Sensing Range = 5 Feet to 50 Feet, Comes with Brackets and Reflector (Reflector Size = 2" x 3.5" x 0.5"). | ||
CPS-UN4 Exterior UL325/2010 Photocell, Back Compatible, Through-Beam, Works with LiftMaster Operators Only, Replaces the CPS-LN4 | ||
41DJ001 Receiver Board for DC Jackshaft, Black & Purple Button (315 MHz), No Light, Board Style, Works with Model: 3800 | ||
3 FT EXT 3 Foot Extension Cord, 18 Gauge, 3 Wire, Flat White Cord with Ground, Male/Female Plug | ||
831RE Pulsar Economy Receiver with Open/Close/Stop Function, Voltage: 24VAC/DC, 318 MHz, Size: 5-3/4"" x 3"" x 1-1/2"" | ||
RQX Wireless Long Range Two Way Voice Intercom/Callbox and Remote Control System with Optional Portable Radios, License Free VHF, No Trenching Required, Easy to Install, 1 Mile Range with No Interference | ||
1KX OPEN-CLOSE with Center Return Key Switch, Mortise Cylinder, Tamperproof, H=4-3/8"", W=4-1/8"", D=2-5/8"" | ||
3BF OPEN-CLOSE-STOP Push Button, Metal Enclosure, Faceplate: H=5"", W=3"", Back Box: H=4"", W=2"" | ||
1KFX-SLF OPEN-CLOSE with Center Return Key Switch, S Type Large Format Cylinder, Flush Mount, Tamperproof, Faceplate: H=6", W=4-3/4", D=2-7/8", Back Box: H=3-3/4", W=3-3/4" | ||
ME110-2E 5FT Inexpensive Universal Edge with Channel for Pocket Area on Gates, 5 Foot, Black in Color, Non-Monitored | ||
R42001 Multi-Code Wireless Keypad, 300 MHz, 12 Buttons (0-9 with A-Z on Buttons, Radio Learn & Access Learn), NO Cover, Color: Gray, 4 Digit PIN | ||
8832T Pulsar Two Button Transmitter, 318 MHz, 8 Dipswitch, Color: Black with Gray Buttons, Can Operate 2 Doors | ||
1MHD Momentary Contact, Metal Enclosure, Double Pole Contacts, Red Push Button, H=3-1/2"", W=3"", D=3"" | ||
41A5507-3 Receiver Board for DC Belt Drive with Battery Back-Up, Black & Red Button (390 MHz), No Light, End Panel Style, a/k/a 41A5507-6C, Works with Model 2500B | ||
1BXT Non-Metallic Enclosure, Double Pole Contacts, H=3-1/4"" W=2-3/4"" D=2-1/2"" | ||
41DB001-1 Receiver Board for Belt Drive, Black & Purple Button (315 MHz), End Panel Style, Works with Model 3500 | ||
41AC075-2S Receiver Board for AC Chain Drive, Purple Button (315 MHz), Light, 3/4 HP, Single Capacitor (see P/N 41AC075-2 for Dual Capacitor - OBSOLETE no replacement), Works with Models: 3585 (Belt), 3595, 3575, 3575-267DK, 2585 & 2595 | ||
SMDRG Megacode One Channel Extended Range Receiver, 318 MHz, Voltage: 24VAC/DC, Supports 40 Transmitters, ""F"" Connector, Model: DNR00098 | ||
HBFX-CC OPEN-CLOSE with Center Return Key Switch, Changeable Cylinder, Stainless Steel Faceplate, Faceplate: H= 4-1/2"" W=2-3/4", Back Box: H=4", W=2", D=2" | ||
4-20-2 Retracted Length=4 Feet, Extended Length=20 Feet, 2 Wire, 18 Gauge, Cord Type SJEO | ||
ADV-100SG Exterior Flush Mount Keypad in Single Gang Back Box (back box not supplied) with 100 Codes, Reprogrammable, Voltage: 12-24VAC/DC, Faceplate: H=4-1/2"", W=2-3/4"" | ||
EAGLE Motion Detector with Unidirectional Tracking or Bidirectional Sensing Capabilities, Wide and Narrow Pattern Antennas, IP45 degree of protection, Water Resistant, Voltage 12-24VAC-DC, Available Mounting Height Options: Low Mount 7' - 10', High Mount 10' - 17'; **NOTE: Optional Programming Remote Available - See P/N REMOTE | ||
LCE-3A Same as LCE-3 Except Double Pole Terminals on CLOSE, STOP. Momentary Contact, OPEN-CLOSE-STOP Faceplate H=4-1/2"" W=2-3/4"" Back Box H=4-1/4"" W=2-1/2"" | ||
R3070 Multi-Code One Button Micro-Miniature Transmitter, 300 MHz, 10 Dipswitch, Size: 2"" x 1-1/2"", Color: Gray with Gray Button & LED |