- Display 45 Products per page
Filters Sort results
Reset Apply
KEY Duplicate Cut Keys: Available Keys: Mortise # 001; 3BXL/PBTL-3 #s Z100, Z101, Z102, Z103 & Z104; 3BXLT #s K001, K002, K003, K004 & K005 | ||
41D3452 Limit Switch Assembly for Chain Drive, Compatible with Liftmaster Garage Door Openers Manufactured from 1994 to current | ||
PBC-2 Single Gang Box, Stainless Steel Faceplate, Momentary Contact, OPEN-CLOSE, H=4-1/4"" W=2-3/4"" Back Box H=4"" W=2"" | ||
3BFLX OPEN-CLOSE-STOP Push Button with Lockout, Metal Enclosure, Buttons aligned in a triangular pattern, Faceplate: H=6"", W=4-3/4"", D=2-7/8"", Back Box: H=3-3/4"", W=3-3/4"" | ||
OMRON E3JM Exterior Through-Beam Photocell, Voltage: 24-240VAC/12-240VDC, Sensing Distance=32 Feet, Comes with Emitter, Receiver and Brackets, 1P 66 Rated Watertight and Dust-tight, UL Listed | ||
R1-SQ 1 Channel Long Range Receiver (up to 1800 feet); 917 MHz; Memory: Up To 99 Button Codes per Channel; Voltage: 10-24VAC or 9-48VDC; Dimensions: 3-7/8" x 2-7/16" x 1-3/16"; HL-951R1-SQ | ||
41A2817 Kit that Includes White Gear, Packet of Grease and Washer/Fittings, Works with 41A5658, 41A5585-1 and 41C4220A | ||
3 FT EXT 3 Foot Extension Cord, 18 Gauge, 3 Wire, Flat White Cord with Ground, Male/Female Plug | ||
DC-DT2 Digi Code Two Button Transmitter, 310 MHz, 8 Dipswitch, Black with Blue Buttons, Compatible with Delta3 | ||
DR4 Delta 3 Four Channel Receiver, 310 MHz, 8 Dipswitch, Voltage: 24VAC/DC, Wire Antenna (NOT ""F"" Connector), Model: DNR00023A | ||
MGR Megacode One Channel Gate Receiver, 318 MHz, Voltage: 12-24VAC/DC, Supports 40 Transmitters, Model: DNR00104 | ||
GRD2 Delta 3 Two Channel Gate Receiver, 310 MHz, Two Banks of 8 Dipswitches, Voltage: 12-30VAC & 10.5-30VDC, ""F"" Connector, Comes with 3 Feet of Coax Cable, Model: DNR00102 | ||
3BLM OPEN-CLOSE-STOP Push Button with Mortise Lockout, Metal Enclosure, Buttons aligned vertically, H=7"", W=2-3/4"", D=3-1/2"" | ||
NP2 Vehicle Detector with Ten Selectable Sensitivities, Dual Relay, Four Selectable Frequencies, Over Voltage Protection, Comes Standard with Harness, White in Color with Blue Face | ||
828LM LiftMaster Internet Gateway controls and monitors your garage door opener, gate operator, house lights and other LiftMaster MyQ enabled accessories using a smartphone, tablet or computer. | ||
BD-4X6P Paveover Preformed Loop Supplied with 18 AWG Insulated Wire with 40 Foot of Lead, Size: 4 Foot x 6 Foot | ||
AP-5 Megacode Single Door/Gate Controller with Built-In Receiver that Supports up to 480 Block Coded Transmitters, 318 MHz, Voltage 12-24VAC/DC, Includes 3 Feet of Coax Cable | ||
1KF-BC OPEN-CLOSE with Center Return Key Switch, Best Cylinder or Equivalent, Flush Mount, Tamperproof, Faceplate: H=6"", W=4-3/4"", D=2-7/8"", Back Box: H=3-3/4"", W=3-3/4"" | ||
41A4885-5 Gear and Sprocket Assembly for Belt Drive, also comes with Grease Packet and Hardware | ||
MDT-4A Megacode Deluxe 5 Button Transmitter, 318 MHz, Model: DNT00054A, Tall Skinny Unit, Four Multi-Colored Buttons with Extra Small Button on Top of Transmitter, Fifth Button will only work Linear Controllers & AP-5, Will Not Work with Simple Receivers - SMDRG, MDR, ETC. | ||
R1092-07 Linear Transformer with Wiring Harness, Connects a 3 Terminal Receiver to a 2 Terminal Operator, Voltage 24VAC, Comes with 25 Feet of Wire, Works with R1090 and 3090 Receivers | ||
IXIO - ST Presence Detector Provides Curtain of Protection, Mounting Height 6.5' to 11.5', Adjustable Pattern 10 Feet Wide at 10 Feet High, Comes with Wide and Narrow Lenses, Standard Cable Length is 10 Feet (also Available with 30 feet), Voltage: 12-24VAC/DC; **NOTE: Optional Programming Remote Available - See P/N REMOTE | ||
1KXS-CC NEMA 4 Exterior Tamperproof OPEN-CLOSE Changeable Cylinder Key Switch with Stop Button Surface Mount OPEN-CLOSE with Center Return Key Switch with Stop Button, Changeable Cylinder, Tamperproof, H=4-3/8”, W=4-1/8", D=2-5/8" | ||
41A5483 Receiver Board for Chain Drive Deluxe & Panel, Red Button (390 MHz), Light, End Panel Style, Works with Models: 2265, 2565, PD610, PD612K & 7420 | ||
R3028-50 Multi-Code/Stanley Two Channel Receiver, 300 MHz or 310 MHz (with toggle to change MHz), Voltage: 24VAC/DC, 10 Dipswitch, ""F"" Connector and comes with 3 Feet of Coax Cable | ||
3B4XL OPEN-CLOSE-STOP Push Button with Lockout, Rosite Enclosure, Buttons aligned in a triangular pattern, H=4-1/4"", W=4-1/4"", D=2-1/2"" | ||
3BXC OPEN-CLOSE-STOP Push Button with Protective Cover for Wet Locations, Metal Enclosure, H=4-1/2"", W=2-3/4"", D=2-3/4"" | ||
41A5021-1 Receiver Board for Standard Chain Drive, Red Button (390 MHz), No Light, Flat Panel, Works with Models: 985, 1240R, 1245R, 1246R, 1255R, 1256R, 6200, 7220 & PD600 | ||
1KXS OPEN-CLOSE with Center Return Key Switch with Stop Button, Mortise Cylinder, Tamperproof, H=4-3/8, W=4-1/8"", D=2-5/8"" | ||
893MAX LiftMaster Three Button Transmitter, 390 MHz and 315 MHz, Backwards Compatible, Works with Billion Code, Security+ and Security+ 2.0 | ||
FALCON EX Motion Detector with Unidirectional or Bidirectional, Can Discriminate Between Pedestrian and Vehicular Traffic, Explosion Proof (NEMA 7 & 9), Voltage: 12-24VAC/DC, Standard Mounting Height 11-1/2' - 23'; Also available XL 6-1/2' - 11'; **NOTE: Optional Programming Remote Available - See P/N REMOTE | ||
MT-2B Megacode Two Button Block Coded Transmitter, 318 MHz, Model: ACP00746 | ||
9931R Pulsar One Channel Receiver, 318 MHz, 9 Dipswitch, Voltage 24VAC/DC, 3 Prong Connection | ||
HBF-CC OPEN-CLOSE with Center Return Key Switch, Changeable Cylinder, Stainless Steel Faceplate, Faceplate: H= 4-1/2"" W=2-3/4", Back Box: H=4", W=2", D=2" | ||
1KF-SLF OPEN-CLOSE with Center Return Key Switch, S Type Large Format Cylinder, Flush Mount, Tamperproof, Faceplate: H=6"", W=4-3/4"", D=2-7/8"", Back Box: H=3-3/4"", W=3-3/4"" | ||
HBFSX-BC OPEN-CLOSE with Center Return Key Switch with Stop Button, Best Core Cylinder or Equivalent, Stainless Steel Faceplate, Faceplate: H= 4-1/2", W=2-3/4", Back Box: H=4", W=2", D=2" | ||