- Display 15 Products per page
Filters Sort results
Reset Apply
SRC-1 Converts Older Style Commercial Openers with Non-Reversing Motor to STOP, PAUSE and REVERSE when Sensor Detects an Obstruction | ||
PRH-100 Flush Mounted Emergency Egress Control, Handle is Flush with Faceplate, comes with 15 Foot of Cable with S-Hook, Faceplate: H=8-1/4"", W=4-1/2"", Back Box: H=7"", W=3-3/4"", D=3-1/2"" | ||
1K4X OPEN-CLOSE with Center Return Key Switch, Mortise Cylinder, Non-Tamperproof, Rosite Enclosure, H=4-1/4, W=4-1/4"", D=2-1/2"" | ||
1KFX OPEN-CLOSE with Center Return Key Switch, Mortise Cylinder, Flush Mount, Tamperproof, Faceplate: H=6"", W=4-3/4"", D=2-7/8"", Back Box: H=3-3/4"", W=3-3/4"" | ||
3BFX OPEN-CLOSE-STOP Push Button, Metal Enclosure, Buttons aligned in a triangular pattern, Faceplate: H=6"", W=4-3/4"", D=2-7/8"", Back Box: H=3'3/4"", W=3-3/4"" | ||
RLC-K72 Non-Monitored Light Curtain, Height: 72 Inches; Sensing Distance: 32 Feet; Waterproof Housing (IP67) | ||
HBFS-CC OPEN-CLOSE with Center Return Key Switch with Stop Button, Changeable Cylinder, Stainless Steel Faceplate, Faceplate: H= 4-1/2", W=2-3/4", Back Box: H=4", W=2", D=2" | ||
1KXL-CC ON-OFF Two Position Key Switch, Changeable Cylinder, H=4-3/8", W=4-1/8"", D=2-5/8" | ||
R3083 Multi-Code Two Button Miniature Transmitter, 300 MHz, 2 Banks of 10 Dipswitches, Size: 2"" x 1-1/2"", Color: Gray with Gray Button & LED | ||
DR4 Delta 3 Four Channel Receiver, 310 MHz, 8 Dipswitch, Voltage: 24VAC/DC, Wire Antenna (NOT ""F"" Connector), Model: DNR00023A | ||
41A5021-1 Receiver Board for Standard Chain Drive, Red Button (390 MHz), No Light, Flat Panel, Works with Models: 985, 1240R, 1245R, 1246R, 1255R, 1256R, 6200, 7220 & PD600 | ||
JMX Wireless Long Range Two Way Voice Intercom/Callbox and Remote Control System with Optional Portable Radios, License Free VHF, No Trenching Required, Easy to Install, 1 Mile Range with No Interference | ||
VSA-3 Exterior Electrical Vehicle Treadle Switch, 3 Foot Length, In Protective Housing with Ramped Edges, 24VAC, Yellow/Black in Color | ||
FALCON EX Motion Detector with Unidirectional or Bidirectional, Can Discriminate Between Pedestrian and Vehicular Traffic, Explosion Proof (NEMA 7 & 9), Voltage: 12-24VAC/DC, Standard Mounting Height 11-1/2' - 23'; Also available XL 6-1/2' - 11'; **NOTE: Optional Programming Remote Available - See P/N REMOTE | ||
889LM LiftMaster MyQ Control Panel, Allows you to control your garage door opener (manufactured since 1998) with you smartphone, tablet or computer (when paired with the 828LM LiftMaster Internet Gateway). | ||
831T Pulsar Wall Mount Three Button Transmitter to Operate 1 Door with Open/Close/Stop Function, 318MHz, Size: 5-3/4"" x 3"" x 2-1/4"" | ||
STAR 1000 LiftMaster Receiver, Programs upto 1000 devices (a combination of transmitters and wireless keyless entries), Compatible with Security+ 2.0 Only | ||
R95 Linear Transformer, Connects a 3 Terminal Receiver to a 2 Terminal Operator, Comes with 3 Feet of Wire, a/k/a TF524 | ||
41A6569 Bracket Kit Includes ""C"" Wrap Bracket, Square-Holed Bracket and Slotted Mounting Bracket | ||
KNX-2 Fire Access Station with Contact on Microswitch Closes when Padlock (not included) is Removed | ||
IXIO - ST Presence Detector Provides Curtain of Protection, Mounting Height 6.5' to 11.5', Adjustable Pattern 10 Feet Wide at 10 Feet High, Comes with Wide and Narrow Lenses, Standard Cable Length is 10 Feet (also Available with 30 feet), Voltage: 12-24VAC/DC; **NOTE: Optional Programming Remote Available - See P/N REMOTE | ||
CYL-3BXLT Cylinder Only that Includes 2 keys: Available Key#'s K001, K002, K003, K004 & K005 | ||
3BFL OPEN-CLOSE-STOP Push Button with Lockout, Metal Enclosure, Buttons aligned in a triangular pattern, Faceplate: H=6"", W=4-3/4"", D=2-7/8"", Back Box: H=3-3/4"", W=3-3/4"" | ||
2BXC OPEN-CLOSE Push Button with Protective Cover for Wet Locations, Metal Enclosure H=4-1/2"", W=2-3/4"", D=2-3/4"" | ||
OAM-Explorer The OAM-EXPLORER uses a large microwave detection area for activation, and infrared technology for safety around the threshold. The sensor can control external devices such as warning lights or alarms in order to warn vehicles and pedestrians on the opposite side of the door. Configuration and fine-tuning can be done with via a smart phone app. Voltage: 12-24VAC/DC, NEMA 4, Mounting Height: 6'7" - 19'8". | ||
TSD-1/FLUSH Tamperproof Screw Bit for Flush Mounted Units: 1KF, 1KFX, 1KFS, 1KFSX, HBF, HBFX, HBFS, HBFSX, HBFT, HBFST | ||
41A5021 Receiver Board for Deluxe Chain Drive, Red Button (390 MHz), Light, Flat Panel, Works with Model 1265 | ||
41A5483 Receiver Board for Chain Drive Deluxe & Panel, Red Button (390 MHz), Light, End Panel Style, Works with Models: 2265, 2565, PD610, PD612K & 7420 | ||
D-PED Dual Height Pedestal at 42 Inch and 72 Inch, Mounting Face: W=4"", L=4"", Slots: W=1/4"", L=3/4"", Base Plate: W=5-11/16"", L=5-11/16"", Black in Color | ||
3B4X OPEN-CLOSE-STOP Push Button, Rosite Enclosure, Buttons aligned in a triangular pattern, H=4-1/4"", W=4-1/4"", D=2-1/2"" | ||
3BFLX OPEN-CLOSE-STOP Push Button with Lockout, Metal Enclosure, Buttons aligned in a triangular pattern, Faceplate: H=6"", W=4-3/4"", D=2-7/8"", Back Box: H=3-3/4"", W=3-3/4"" | ||
882LMW LiftMaster Multi-Function Control Panel, Controls your garage door and opener lights, Adjustable Light Timer Function, Easily programs remote controls and MyQ enabled accessories, Compatible ONLY with Security+ 2.0 garage door openers enabled by MyQ technology. | ||
1KFX-SLF OPEN-CLOSE with Center Return Key Switch, S Type Large Format Cylinder, Flush Mount, Tamperproof, Faceplate: H=6", W=4-3/4", D=2-7/8", Back Box: H=3-3/4", W=3-3/4" | ||
9931R-4F OLD Allstar One Channel Receiver with ""F"" Connector, 318 MHz, 4 Wire Connection, Voltage: 24VAC/DC, a/k/a P/N 111645 | ||
890MAX LiftMaster Three Button Mini Transmitter, 390 MHz and 315 MHz, Backwards Compatible, Works with Billion Code, Security+ and Security+ 2.0 | ||
365LM LiftMaster Universal Plug-In Receiver with Security+, 315 MHz, Black Learn Button (Purple Wire), Needs Outlet, Wire Antenna (No Coax Connection), Capacity 7 Transmitters & 1 Keypad | ||
412HM LiftMaster Universal Co-Axial Receiver, 390 MHz, Voltage: 24VAC/DC, Can Work with Dipswitch, Billion Code or Security+ (can only choose one), Black Learn Button, Capacity 31 Transmitters in Normal Mode | ||
2986-01 Stanley Wireless Keypad, 310 MHz, 12 Buttons (0-9 with A-Z on Buttons, Radio Learn & Access Learn), NO Cover, Color: Gray, 4 Digit PIN | ||
41A5507 Receiver Board for DC Belt Drive without Battery Back-Up, Black & Red Button (390 MHz), No Light, End Panel Style, Works with Model 2500 | ||
41AC075-2S Receiver Board for AC Chain Drive, Purple Button (315 MHz), Light, 3/4 HP, Single Capacitor (see P/N 41AC075-2 for Dual Capacitor - OBSOLETE no replacement), Works with Models: 3585 (Belt), 3595, 3575, 3575-267DK, 2585 & 2595 | ||
RQX Wireless Long Range Two Way Voice Intercom/Callbox and Remote Control System with Optional Portable Radios, License Free VHF, No Trenching Required, Easy to Install, 1 Mile Range with No Interference | ||